| |
Application
LLFA TAPE™ seals by compression. The tape is pulled as tightly as possible around the splice on the first layer, then with minimal tension on successive layers. The tape then amalgamates with itself, and the tension is maintained indefinitely. The quality of this seal does not depend on the surface of the splice, nor does it rely on adhesive. There is no concern over chemical compatibility, cleanliness or surface condition. This tension will alsonot varry due to the effect of heat, humidity, or cold.
Abrasion Resistance
LLFA TAPE™, due to its unique formulation and manufacturing process, isresistant to abrasion and also split propagation. LLFA TAPE™ can be used as a stand alone product, requiring no protective jacketing tape.
Temperature Stability
Other products decrease or lose fusion properties under extreme cold or humid conditions. This is not true of LLFA TAPE™. The applying technician does not have to keep the tape warm in cold conditions or keep it cold in warm conditions.
Ease of Removal
Unlike other jointing solutions, no adhesive is used to maintain the seal. With no sticky residue to clean, LLFA TAPE™ can be removed quickly should re-entry to the joint be required. The use of adhesive in other jointing solutions results in sensitivity to humidity and temperature variations
Fusion
LLFA TAPE™ is an ultra fast self fusing tape. Similar products require a period of time in order to become a homogeneous/solid mass of rubber. With LLFA TAPE™ this happens almost instantaneously. This is an important factor when splicing or protecting a connection that is subject to high humidity or even submergence.
Puncture Repair
The strength of LLFA TAPE™ makes it both a competent insulation solution and an invaluable puncture repair product. A punctured hose or pipe tightly wrapped with LLFA TAPE™ will immediately withstand internal pressure. This pressure will not push between the “fusing layers” because the fusing action takes place so quickly.
Submersion
Rapid fusion allows a newly wrapped splice to be immediately submerged in water. You don’t have to wait a few hours before declaring a circuit, pump motor etc. operable. After you wrap it, you’re ready to go. In addition, LLFA TAPE™ fuses even under cold, hot or moist conditions.
|
